CBAM Intelligence

Every shipment's carbon border cost, computed — not estimated on a spreadsheet.
EU and UK. Regulation-linked. Never a fabricated default.

Qubere resolves embedded emissions, benchmark, certificate price, and phase-in factor for every CN code and origin country from a versioned, checksum-deduped regulatory dataset — and tells you plainly when a number is missing instead of quietly treating it as zero.

2
jurisdictions on one platform — EU CBAM live, UK CBAM (2027) scope tracking
0
auto-activated regulatory sources — every live fetch waits on a human review
1
click from any cost figure to the regulation, version, and source URL behind it

The problem

"Our CBAM number lives in a spreadsheet nobody trusts."

What a trade-compliance lead says about CBAM readiness today:

"Someone copy-pastes default emission values out of a PDF annex once a quarter. Nobody's sure if it's still current."

Stale defaults

"We can't tell which shipments actually have real supplier emissions data versus which ones are silently on the EU default."

Actual vs. default, blurred

"UK CBAM starts in 2027 and we're tracking EU and UK scope in two different documents that never agree."

Two regimes, no single view

How Qubere addresses it

A regulatory dataset with a lifecycle, not a folder of PDFs.

  • The workspace follows the work: Manage, Analyze, Explore, Reports — opening on Imports, and carrying declarations, certificate holding and Article 26 penalty decisions through to release.
  • Product scope, default emission values, benchmarks, certificate price, and phase-in factor each version through stage → validate → activate — a checksum dedupes re-imports, and a bad import rolls back one hop, cleanly.
  • A live-fetch adapter can stage the latest official document automatically — but activation to production stays a manual, audited action every time. Figures that feed real cost calculations don't go live on a cron job alone.
  • Every resolved cost carries its evidence: source, source URL, regulation reference, version, and effective dates — for the benchmark, the certificate price, and the phase-in factor that produced it.
  • EU and UK sit side by side on the same platform: same CN-code lookup, same Cost Lens map, separate regulatory tables and separate applicability rules — because the two regimes are not the same regime with a different flag.
  • Missing data is never rounded to €0. An incomplete calculation is flagged incomplete and surfaced for attention, not folded into a total that looks clean.

Exposure overview

Every country, every CN code, one dollar figure — or an honest gap.

The overview aggregates every calculation across the account: estimated exposure, embedded emissions, assessed quantity, and countries assessed, split between actual supplier emissions and EU default. Anything incomplete is pulled out of the total and listed separately, with the exact missing input named.

  • World map of exposure by country of origin — click a country for its sector breakdown
  • "Assessments requiring attention" names the missing default emission, benchmark, or regulatory record, with a one-click path to the regulatory lookup
  • Actual vs. EU-default counts kept separate, never blended into a single ambiguous average
How to demo
Open the CBAM overview, filter to a sector with a mix of actual and default emissions — show the KPI split, then click an "attention required" row straight into the missing regulatory record.
CBAM/Overview
SR
Sarah
Estimated exposure
€184,220
Embedded emissions
2,140.6 tCO2e
Total calculations
96
Actual: 61 · EU default: 35
Assessments requiring attention
72071100 · CNMissing benchmark → Regulatory lookup
76011000 · INMissing default emission (country-specific) → Regulatory lookup

Cost Lens

Price sourcing decisions before you sign the PO, not after the entry.

Enter a CN code and a scenario year; Cost Lens resolves default emissions, benchmark, certificate price, and phase-in factor for every country of origin in one pass — a bulk resolver, not 190 sequential lookups — and paints the world map by estimated cost per tonne. Toggle official certificate price against a scenario price to stress-test a future year.

  • One resolved context per country: default emission factor, benchmark, certificate price, and the full multi-year phase-in schedule
  • The world map is there from the first click; hover any country for its cost per tonne with direct, indirect, total and chargeable emissions and the benchmark behind it
  • Quoting mode swaps the country defaults for your own installations: each plant is placed on the map by its coordinates and coloured by cost per tonne on its latest emission record, actual or default. Right-click the map to add a supplier, or an installation at that spot
  • Save a scenario (CN code, year, price mode) and reload it later — nothing recomputed from memory
  • EU and UK share the same map component; UK renders scope-only applicability until UK default values are published
How to demo
Search a CN code, switch scenario year forward two years, and watch the phase-in percentage — and the map colors — shift with it. Then switch to Quoting and show your own plants priced for the same year. Flip to UK and show the scope-only card for the same code.
CBAM/Cost Lens
SR
Sarah
Germany (DE)€41.20 / t
China (CN)€58.90 / t
India (IN)missing default value
Benchmark v2026-Q3 · Certificate price ETS-linked, official

Quotes

Model what a purchase costs under CBAM before you commit to a supplier.

A quote prices a prospective purchase from the emission records you already hold for a supplier: pick the supplier, add the goods and tonnes, choose the year of import and the certificate price, and the cost per item is computed from direct plus indirect emissions and the CBAM factor published for that year. When no factor is published for the year, the item says Not priced — it is never filled with a guess.

  • Quote items are scoped to the chosen supplier's emission factors — a supplier with no emission records is told to add them first, not quoted on invented numbers
  • The certificate price can be typed in or picked from suggested prices: latest, previous, quarter and year high / low
  • Quotes are saved per account and listed with their year, supplier and priced or not-priced status
How to demo
Open Analyze → Quotes, create a quote for a supplier with emissions on file, then change the year of import to one with no published factor and show the item drop to Not priced.
CBAM/Cost Lens
SR
Sarah
Illustrative quote
SupplierSelected from your suppliers
Year of importPublished CBAM factor applies
Item · tonnes × emission factorpriced
Year with no published factorNot priced

Certificate price

The price behind every figure, with its source and its history.

The Certificate Price screen shows the published CBAM certificate prices on record: a weekly reference-price chart you can hover for the detail, this week against last week, the latest quarter price, and the year's high and low, each with its source. It is marked as feeding your bill, so you can see which price your costs and quotes are computed from.

  • Weekly reference-price chart with range filters; hover a point for the figure and its date
  • This week versus last week, the latest quarter price, and year high and low
  • Every price shows its source; when no price is on record the screen says so and points to the Costs assumptions instead of showing a number
How to demo
Open Analyze → Certificate Price, hover the weekly chart, then open Costs to show the same price feeding the estimate.
CBAM/Cost Lens
SR
Sarah
What the screen shows
This week · vs last weekprice and change
Latest quarter pricewith its source
Year high · year lowover the selected range
No price on recordstated, never filled in

Calculator

One shipment, a real number — actual emissions or EU default, never blended.

The Calculator produces a single shipment's CBAM result: Quick (EU default emission method) or Advanced (actual production facility direct/indirect emissions entered by hand), plus an eligible carbon-price-paid-in-country-of-origin deduction against the certificate cost. A Cost Lens country deep-links straight into a pre-filled Advanced calculation.

  • Emission method is an explicit choice on every calculation — EU_DEFAULT or ACTUAL, recorded on the result, never inferred
  • Carbon price already paid abroad is captured with its scheme, basis, period, and FX rate, then deducted from the exposure it actually offsets
  • UK jurisdiction runs the same form into a scope/GHG/system-boundary check only — and says so up front, since no UK default values exist yet to produce a number
How to demo
Run a Quick calculation on EU default, then re-run the same CN code as Advanced with a lower actual emission figure and a carbon price paid — show the exposure drop, and why.
CBAM/Calculator
SR
Sarah
Emission methodACTUAL
Direct / indirect1.6 / 0.4 tCO2e/t
Carbon price paid¥320/t · deducted
Estimated exposure€3,140

Regulatory data lifecycle

A checksum, a version, and a human sign-off between the source and production.

Every official document — product scope annex, default emission values, benchmark, certificate price, phase-in schedule — is staged, checksum-deduped against anything already imported, and validated before it can ever go active. A live fetcher can pull the latest published document automatically, but it only ever reaches "staged" or "needs review" — never "active" without a person confirming it.

  • Duplicate re-imports of the same document are detected by SHA-256 and rejected, not silently re-applied
  • Activating a new version automatically supersedes the prior one — one hop, reversible with a single rollback
  • A Data Health view shows the last fetch, last success, and record count for every EU and UK source at a glance
How to demo
Open Regulatory Data → Data Health, point at a source's last-run timestamp and status, then walk into the source record and show its checksum, version, and regulation reference.
CBAM/Regulatory Data
SR
Sarah
EU · Default Emission Valuev2026-09FETCHEDneeds review
EU · Benchmarkv2026-Q3ACTIVEvalidated
UK · Product Scopev2026-08VALIDATEDvalidated
EU Benchmark v2026-Q3
Regulation (EU) 2023/1773, Annex V · sha256 checksum verified, no duplicate · superseded v2026-Q1 on activation.

EU and UK, side by side

Two carbon border regimes. One CN-code lookup, one map, two rulebooks.

UK CBAM (effective 2027) tracks its own product scope, aggregated goods categories, commodity-category mapping, GHG scope, and system boundary — deliberately separate tables and separate applicability logic from EU CBAM, because the regimes genuinely differ on scope and boundary definitions. A jurisdiction toggle switches the whole workspace; nothing is silently shared between them.

  • A CN code can be in EU scope, UK scope, both, or neither — the code comparison view shows exactly which
  • UK applicability renders scope-only today, ready to switch on full cost calculation the moment UK default values are officially published
  • Every UK regulatory source is checked against an official-source allowlist before it can ever be staged
  • A scheduled monitor watches the HMRC sector-rate, default-value and qualifying carbon-pricing-scheme pages and only stages and validates a change — a person approves and activates it
  • UK return and payment deadlines for the transitory accounting periods (SI 2026/830) sit on the Home page beside the EU deadlines: 2027 due 31 May 2028; Q1 2028 due 31 July 2028; Q2 2028 due 29 September 2028
How to demo
Open Code Comparison, enter a CN code that's EU in-scope but UK out-of-scope (or vice versa) — show the two verdicts side by side with each regime's own reasoning.
CBAM/Code Comparison
SR
Sarah
EU CBAM
Scopein scope · Iron & Steel
RegimeTRANSITIONAL
UK CBAM (2027)
Scopein scope · commodity category CC-04
Cost calculationnot yet available — defaults unpublished

Manage workspace

Open CBAM Intelligence and land on your imports — the work, not a dashboard.

The CBAM menu is organised as four areas: Manage, Analyze, Explore and Reports. It opens on Manage → Imports, where each import line carries its CN code, origin, production facility, emissions basis and customs reference. Suppliers, Production Facilities, Emissions, Benchmarks and Carbon Price Evidence sit one tab away, so the inputs are kept next to the lines that use them.

  • Manage: Imports, Suppliers, Production Facilities, Emissions, Benchmarks, Carbon Price Evidence
  • Analyze: CBAM Overview (Exposure Map), Certificate Price, Cost Lens, Costs, Certificates, Hedging, Quotes, Annual Declarations
  • Explore: Calculator, Calculations, Code Check, Code Comparison and Regulatory Data. Reports: filing-ready outputs
  • Imports can be cancelled and restored, and link back to the customs entry they came from
  • The Home page shows imports, tonnes, estimated exposure and lines missing emissions data at a glance, with an EU / UK switch for the deadlines card
How to demo
Click CBAM Intelligence in the sidebar — it opens on Imports. On Home, flip the deadlines card between EU and UK. Walk the tabs left to right, then jump to CBAM Overview from Analyze.
CBAM/Manage/Imports
SR
Sarah
Illustrative import lines
72071100 · CNActual emissions · verified
76011000 · INEU default · supplier data missing
27160000 · TRElectricity · MWh required

Annual Declarations and certificates

From import lines to the declaration, certificate holding and surrender.

Qubere applies the definitive-regime rules as separate, checkable steps: declarant authorisation, the 50-tonne threshold ledger, the Article 22 emissions values, the certificate holding requirement and the certificate ledger. Each step names what blocks it, instead of producing a total that looks complete.

  • Declarant standing and authorisation recorded before a declaration can be built
  • Actual emissions need a verification record; foreign carbon price credit needs attached evidence
  • Certificate holding is calculated from the declaration lines, and blocked lines are listed with the reason
  • Obligations stay not applicable until the regulation makes them effective — never shown early
How to demo
Open Annual Declarations, pick a reporting year, and show a line that is held back with its named blocker. Then open Certificate Price to see the evidence behind the figure.
CBAM/Annual Declarations
SR
Sarah
Declarant authorisationrecorded
50 t threshold ledgerevaluated
Verification (actual emissions)1 line missing
Certificate holdingnot applicable until effective
Every blocker names the line and the missing input

Authorisation and penalties

Penalty amounts follow the regulation — and the decisions stay with the authority.

Article 17(7a) provisional decisions are tracked as a lifecycle, and imports that depend on them are held until the decision is recorded. Article 26 penalties are composed from the statutory rule: a minimum of N × P1, a standard amount of minimum × m, with m between 3 and 5 and set by the authority. The authority's multiplier and any reduction decision are recorded as inputs; Qubere never picks them.

  • Reduction is offered only when the exceedance is within 10%, or Article 17(7a) applies; the reduced amount stays between the minimum and the standard amount
  • Status moves from multiplier required, to reduction decision open, to decided — each step blocks the next
  • Recording payment releases the held import lines into the declaration and holding calculations
  • The Article 26(1) base amount is not yet ingested, so the calculation returns PENALTY_BASIS_NOT_INGESTED rather than an amount
How to demo
Be upfront: the composition logic is live, the base amount is not loaded. Show the blocked state, then walk the decision sequence.
CBAM/Annual Declarations/Penalties
SR
Sarah
Base amount (Art 26(1))PENALTY_BASIS_NOT_INGESTED
Multiplier m (3–5)authority decision
Reductionauthority decision
Payment → releaseafter decision

Electricity and data provenance

Electricity is priced from MWh, and licensed data stays off until it is cleared.

Imported electricity emissions are computed from the quantity in MWh multiplied by an emission factor. If the MWh quantity is missing, the line fails closed with a named error instead of guessing. Emission factors derived from third-party data carry a licence status, and a gate keeps them out of calculations until the licence is cleared.

  • Electricity lines require MWh; the missing-quantity error is shown on the line
  • Precursor and emission-scope policy decides what is included in embedded emissions, with the rule recorded
  • Cement benchmarks and benchmark reconciliation checked against the regulatory source
  • Regulatory sources are activated by a person, and carry their source, version and effective dates
How to demo
Add an electricity import without MWh and show the blocked state. IEA-derived factors are not cleared for use yet — say so, and show the gate.
CBAM/Manage/Emissions
SR
Sarah
Quantity (MWh)ELECTRICITY_QUANTITY_MWH_REQUIRED
Emission factorsource, version, effective dates
IEA-derived datalicence not cleared · gated

Objection handling

Every hard question, answered directly.

"Where do the default emission values actually come from?"Staged from the official EU Implementing Regulation annexes (or fetched live from the published document), checksum-deduped, validated, and only activated after a human confirms it — every active record carries its regulation reference, version, and effective dates.
"Can a bad live fetch push wrong numbers into our cost calculations?"No. A live fetch can only reach staged or needs-review status. Activation — the only state cost calculations read from — is a separate, manual, audited action every time.
"What happens to a shipment when we genuinely don't have a default value yet?"It's marked incomplete and listed under "assessments requiring attention" with the exact missing input named. It is never counted as €0 exposure in a total.
"Is UK CBAM just EU CBAM with a different label?"No. Separate scope, separate aggregated-goods-category and commodity-category tables, separate GHG-scope and system-boundary definitions, and separate applicability logic — because the two regimes actually differ.
"Will Qubere decide our Article 26 penalty for us?"No. It composes the amount from the statutory rule, but the multiplier and any reduction are decisions by the authority and are recorded as inputs. The Article 26(1) base amount is not loaded yet, so no amount is shown until it is.
"Can we use third-party electricity data today?"Only where the licence is cleared. IEA-derived factors sit behind a licensing gate that is still closed, and electricity lines without MWh fail with a named error.

The close

"Show me the exposure. Show me the regulation behind it. Tell me what's missing."

A CBAM number you can defend, because every input traces back to a versioned, checksummed, human-activated regulatory record — in both EU and UK.

Next step: bring a real CN code and origin country mix from your book of business. We'll run Cost Lens across it, open the regulatory evidence behind one result, and show exactly what's flagged incomplete and why.

Full detail: apps/custom/src/modules/cbam/README.md